Dave grew up in Southern California during the 60’s and 70’s and experienced firsthand the best of Porsche’s racing cars from the 50’s, 60’s and 70’s, including Porsche GT Carrera’s, all of the Spyders, Abarth Carrera’s, 904’s, 906’s and Carrera RS’s, many of which he started working on before he was 20 years old.

In 1972 and 1973, Dave went to the Southern California Regional Occupational Center in Torrance, CA to study machine shop. While studying to be a machinist, he worked at a machine shop that supported a manufacturing company. He worked as an apprentice machinist until the end of 1974. During this time, Dave was introduced to Dr. Warren Eads who was just starting to build his collection of Porsche race cars and had begun restoring them at Al Cadrobbi’s shop in Van Nuys, California. Also, at this time, Dr. Eads started Spyder Sports Racing, which specialized in restoring and racing Porsche 356 GT Carreras and Spyders. Dave became a part of this team at its inception and began working on 550A-0135 alongside Al Cadrobbi at his shop in Southern California. Al was probably the foremost 4 cam mechanic in Southern California from the mid 60’s all the way into the early 2000’s. Al trained under Erhard Zedelmayer, who was a full-time Porsche factory employee and 4 cam specialist who came to California to work for John Von Neumann’s Porsche racing team. Prior to returning to Europe, Erhard sold his shop to Al. The Porsche’s that Al prepped for racing were winning races, and in 1965, Al prepared the Carrera GT Speedster that Dick Smith drove and won the SCCA’s national championship. Al’s intellectual curiosity was amazing; he was always looking at different ways to make the cars lighter and faster. Al’s traits and qualities were instilled in Dave from the onset as he worked alongside Al. As a result, Dave was able to see firsthand and learn about all of the developments on Porsche’s 4 cam race cars, from improvements in suspension technology plus all of the developments in the engines where horsepower increased from 115 to approximately 190. In addition to assisting Al at his shop, Dave also helped support his customers racing efforts at Riverside Raceway, Willow Springs and Laguna Seca. Over the years, Dave and Al worked on 550’s, 550A’s, RSK’s, (including center steer versions), RS-60 Spyders, 904’s and 906’s. During this time, Dave also developed a passion for making these cars look great in addition to going fast, so he started doing the body and paint work too. In between working for Spyder Sports alongside Al Cadrobbi, Dave attended Cal State University at Long Beach where he graduated in 1980 with a BS degree in financial management.

Once Dave graduated college, he started Vintage Car Works, a restoration shop that specialized in the restoration of Porsche GT Carreras and Spyders. He also continued to support Spyder Sports racing and restoration program until the late 80’s when he had a skiing accident which prevented him from working for 1 year. During this time, Dave was recruited to work for Pacific Engineering, a multi-disciplined engineering and construction company, so he closed the restoration shop. Dave started out working as a junior engineer on their bulk material handling projects, and within 1 year, he was promoted to project manager. While working as a project manager, Dave saw the need for a centralized department to manage all of the contracts between our customers and our sub-contractors, so he attended UC Irvine and received a certificate in contracts management. He was promoted to the position of contracts manager and became responsible for negotiating and managing all of the company’s contracts and sub-contracts. This knowledge and experience allowed Dave to advance within the company again, and he began traveling to jobsites with the added responsibility of managing all of the construction and start-up crews. Throughout Dave’s tenure at Pacific Engineering, he continued to work for Spyder Sports on a part time basis. Porsches were still Dave’s greatest passion, and by this time, it made sense that he begin to apply the management skills learned at Pacific Engineering and open another restoration and collision repair facility. Karen and Dave both loved Colorado, so in 1996, he found a business broker in Denver that helped him find a fully equipped collision repair shop that specialized in repairing high end cars. Karen and Dave closed escrow in early 1997 on a shop that supported the local BMW, Lexus and Mercedes dealerships. The shop was equipped with two laser frame machines and two down draft spray booths. It also had enough room to allow Dave to start restoring Porsches again on a full-time basis.

With Dave’s new shop, he once again became an integral part of Spyder Sports restoration team which was in the process of restoring and race prepping 4 Porsche Spyders, a 904 and a 906, to race in Porsche’s 50th Anniversary event at Laguna Seca Raceway in August, 1998. The Spyders’ that he restored and prepared for this event were 550A-0129 which is currently owned by the Porsche family. Dave also prepared 550A-0135 and 718-033 which is one of 5 factory center-steer Spyders along with 718-044 LM, which is one of 2 factory racing Spyders that Porsche made for the Championship of Makes and raced at Le Mans in 1960. Recently, 718-044 received the highest price of any Porsche Spyder sold to date. The 904 was Ben Pon’s famous race car, and the 906 was the 1967 national championship winner driven by Scooter Patrick.

In order to support the restoration and race preparation of these cars for Porsche’s 50th anniversary celebration, Dave prepped & painted 550A-0129 and 718-044 in Colorado. The entire team of Spyder Sports personnel was under a lot of pressure and they all had a lot of responsibility to ensure that these six Porsches were race ready for the event. Once they were there, they had an exciting pit display with all of the Spyders and the 904 side by side in the pits, while the 906 was on display at the Monterey airport. During the event, Dave was part of the pit crew responsible for maintaining all of the cars.

Since the late 90’s, Dave’s shop has become nationally known for restoring Porsche 356 Carreras, Spyders and 911 Carrera RS’s. They have also prepared a center steer RSK to race in the Colorado Grand, and they have restored several rare Ferrari’s, including the 1956 prototype Tour de France, and a Maserati 200 SI. During 2015, Dave and his team had Porsches in 7 different concourse events. They began by showing a 1959 Carrera GS Cabriolet at The Concourse at Amelia Island, followed by events at The Concourse at Greenwich, CT, The Greystone Mansion, The Concourse at Palos Verdes and the 60th Annual Porsche Parade in French Lick, Indiana. Highlights during 2015 were five first place finishes and two second place finishes. However, their most significant result was winning a Gmund Award for the highest number of points and the Overall Restoration Award at the Porsche Parade. Throughout Dave’s career restoring Porsches, he has worked with many amazing people who have become some of his very best friends, and he has met some of the greatest race car drivers from the Golden Era of racing, all while preserving and restoring some of the most revered Porsche’s ever made.



13 + 5 =


We are very proud of this recognition by our customers. We make it our mission to “treat every customer like a guest in our own house – and every vehicle as if it were our own.” Our proven approach will return your vehicle to within a millimeter of its original factory specifications.


Our customers comment frequently on our exceptional skill and care with paint matching and achieving a flawless appearance and finish. Our state of the art equipment and highly skilled, ASE and ICAR certified technicians ensure accurate, thorough repairs.


The owners, along with a team of exceptionally skilled ASE and ICAR certified technicians, have been partners from the start in building a reputation among our customers as the “Best Of The Best.” Our team is among the most experienced and highly qualified in the country.